Rendered at 12:14:06 GMT+0000 (Coordinated Universal Time) with Cloudflare Workers.
SoftTalker 11 hours ago [-]
> switch lights off when a room becomes empty
How is this getting investor money, and how are consumers seeing this as something worth paying for?
It's just not hard to flip the light switch when you leave the room, and you don't need an all-seeing eye uploading everything that happens in your house to a massive corporation.
I can't believe this is a feature that gets the hype that it does. It's almost as cliche as the example of making a dinner reservation.
mynameisash 11 hours ago [-]
This immediately made me think of "smart water bottles" that detect how much of your drink has left the vessel. They can detect what kind of drink they contain and what temperature it is. And so on.
You could not pay me to use such a stupid device. No clue why people invest in or purchase such a product.
kbos87 11 hours ago [-]
I live in a 1700sqft space - not small, but not large. I have ~15 separate banks of overhead lights that were built into my builder grade condo when I bought it, and probably 20 light fixtures (lamps, accent lights, etc) I've added myself. If you are even remotely interested in design, decor or lighting it's easy to end up with a similar number of lights in an average sized space. When I walk through the door, the scene sets itself perfectly based on the time of day. If I didn't have that automation, I'd probably end up turning on the nearest 1-2 lights out of convenience. It's a huge quality of life improvement. Today it takes some up front effort to get it set up, but it's getting easier and easier and more people will realize the benefit.
esikich 11 hours ago [-]
I think their point is that a simple infra red sensor like outdoor motion detector lights will do what you need. There's zero need for a camera to do this. Massive, massive overkill.
walrus01 10 hours ago [-]
There's a fairly large and thriving market in zigbee and/or zwave based "human presence" sensors which can serve dual duty as motion detection via infrared and also using very basic radar, for both turning on/off lights and also to provide data to a DIY security or automation system in Home Assistant.
There have been significant price drops in small modules for short range, rudimentary V-band (60 GHz) radar to do this sort of thing, which companies can built into their consumer-priced product.
I think some of the better ones are a little bit too power hungry to be entirely wireless on battery, and have a USB-C port in their rear, you're meant to plug it in persistently to a small USB charger and tuck the cable away somewhere.
garbagewoman 8 hours ago [-]
Ir detectors don’t work for presence detection.
esikich 5 hours ago [-]
OK.
systoll 10 hours ago [-]
Hell, 'SpaceSense' and other similar tech enables it with existing wifi radios and a software update.
artisinal 4 hours ago [-]
I have three lights in the living room that I toggle just before sunset manually with a switch. Instead of three separate switches, my electrician made it so that one switch turns on all three lights at the same time.
I really don't see it as a "huge quality of life improvement" to not have to walk to the light switch. I typically combine it with a trip to the kitchen to grab some water or a snack.
ishtanbul 10 hours ago [-]
This sounds very cool. I have home assistant and have fiddled around with presence detection but I feel like its pretty niche and preference dependent. My gf did not like it in the bathroom and getting the timing to work perfectly required a ton of fiddling. Maybe apple will get it right but I don’t think their core customers care about home automation to this degree.
harrouet 5 hours ago [-]
You obviously don't have teenagers at home :)
artisinal 4 hours ago [-]
So your teenager doesn't flip the light switch. The LED bulb now continues to draw 8 watt of power. That is less than what a security camera that monitors room activity draws.
NewJazz 11 hours ago [-]
Also how much are we saving flipping lights off for a few hours in the age of LEDs? Most of my electricity bill is either fixed costs or from heating water.
walrus01 10 hours ago [-]
I recently installed a basic flat, round, white LED overhead ceiling light in a bedroom that's been repurposed as a home office (replacing a very old dual screw-bulb center of ceiling fixture on the octagon box), and I don't know if there's any actual savings in the new unit. The previous thing had two "same size/shape as an incandescent" 11 or 12 watt white LED "bulbs" in it, the new unit is specced at 28W. It provides a more evenly distributed light and has a toggle switch to choose between three different color temperatures.
At $0.11 per kWh if say it's 30W and I leave it on 24x7 for a month it's 22.32 kWh, or about $2.5 of electricity a month. Multiply by three for like $7.5 a month if this was a California electric rate. In the longer run I'd like to have a way to turn it on and off automatically not so much to save money, but to have a way to turn off all the house lights in one toggle in home assistant when going to bed, just for the convenience of it.
manwe150 10 hours ago [-]
Across my house, I think I have about a kilowatt or two of LED lights, mostly in the form of ceiling cans at 16W each. Running everything full brightness would thus be about $0.30-$0.50 per hour. It’s the paradox that the same rooms probably would have used the wattage with the old incandescents, it just would have had a lot more shadowy corners.
artisinal 4 hours ago [-]
Do you grow any plants in your home? An average family home will have around a tenth of that energy consumption if you turn on all the lights. 200 watt tops. That is 25 LED bulbs of 8 watt.
ipython 9 hours ago [-]
About 10 years ago I was browsing Home Depot and found an electronic Bluetooth enabled egg carton. It paired with a mobile app to let you know you were out of eggs. Don’t know what the target market for that product was either.
nozzlegear 9 hours ago [-]
That's actually kind of sick, I'd buy it for the novelty
2III7 11 hours ago [-]
It's just a feature that's been available on other smart home platforms for years.
zdragnar 10 hours ago [-]
The fact that a camera is involved is what is jarring, I think. There's plenty of less creepy ways to achieve what other smart home platforms do, which makes one wonder what else it is being used for. If we are to trust them, the camera won't record... until the terms of service update and it gets buried in legalese and surprise, everyone gets opted into having all of the camera's sensors constantly beaming to a cloud for myriad purposes.
dc3k 6 hours ago [-]
it has also been available on apple home for 10 years
judge2020 11 hours ago [-]
Really depends on your home layout. More new homes are open layout so the light switch may be further away.
But ya, it's not that hard, the only place I've found a motion sensor to be useful was in the garage.
2III7 11 hours ago [-]
Motion sensor is not the same as a presence sensor. Presence sensors often include a PIR sensor in addition to several other sensors to detect if someone is in an area.
sandworm101 11 hours ago [-]
The problem was solved back in the 80s, long before cloud computing.
What investor money? This is purportedly an internal project by a large tech company. And what hype? This is speculative article based on second-hand leaked information.
SoftTalker 10 hours ago [-]
Well, fair point. The investors are the people buying Apple stock I guess. But this is what they're chosing to promote as a benefit for the trillions being spent on GPUs, servers, data centers, power, water, and all the rest of it? Turning off the lights when you leave the room?
wat10000 10 hours ago [-]
Apple isn’t real big in the data center space either. The described feature doesn’t take a ton of horsepower, I’d bet it’s done locally.
CircuitSeuss 11 hours ago [-]
This could also be achieved so many other ways for a fraction of the price
9 hours ago [-]
brg 9 hours ago [-]
It’s pretty difficult, at least my for my kids.
m463 12 hours ago [-]
sound like they are trying.
Unfortunately apple devices collect EXTREME amounts of telemetry, you are opted-in by default, and much of it is impossible to opt-out of.
JumpCrisscross 12 hours ago [-]
I so sorely lost faith in Apple when they started serving ads in Maps. I know they're trying to be privacy preserving. But a compromised value isn't a value, it's a guideline.
iambenm 12 hours ago [-]
The number of ads I have gotten lately about buying ads on Apple Maps has me glad I'm not using Apple Maps. It turns out they're just late to the ad game, not opposed to it.
spike021 10 hours ago [-]
what are you using for a Maps app if not Apple? Google is (probably) much worse and does pretty much all the same things. Even in nav mode it shows a bunch of sponsored pins like chain restaurants or stores.
artisinal 4 hours ago [-]
TomTom. Only navigation that I can find that has a good offline mode. No ads, just POIs. Best CarPlay interface out of all apps.
JumpCrisscross 10 hours ago [-]
> what are you using for a Maps app if not Apple?
CoMaps. Though that's probably a bit hardcore for most people.
At the end of the day, Google is worse. But Google has a better set of POIs. If Apple is throwing in the towel on privacy, I'm not sure the degrees matter as much as the difference in quality.
M95D 3 hours ago [-]
OsmAnd
Citizen_Lame 12 hours ago [-]
Privacy was simply a marketing scheme, not an actual conviction.
alehlopeh 11 hours ago [-]
Apple is the only big tech company that is not EXTREMELY incentivized to sell your data.
m463 10 hours ago [-]
not the same as collecting your data, especially with ads.
90d 11 hours ago [-]
Sadly in current year, whenever tech companies say they aren't going to do something that means they are going to do it in two different ways and try to hide them both.
Gigachad 9 hours ago [-]
Amounts of telemetry is pretty vague though. The type and sensitivity of the data is what matters. They can collect gigabytes of crash reports or performance metrics for all I care because that’s not my personal data.
M95D 2 hours ago [-]
Crash reports contain a lot of personal data. It's not just a bunch of memory addresses. It's also the environment, what you were doing, etc. Performance metrics are even worse. It's what you are doing when it's not crashing.
artisinal 12 hours ago [-]
You can disable analytics sharing in the settings menu of iOS.
bangonkeyboard 12 hours ago [-]
"They found the analytics control and other privacy settings had no obvious effect on Apple’s data collection—the tracking remained the same whether iPhone Analytics was switched on or off." (https://gizmodo.com/apple-iphone-analytics-tracking-even-whe...)
artisinal 4 hours ago [-]
Article from 2022.
9 hours ago [-]
coef2 8 hours ago [-]
> It could also create limitations for customers who expect a security camera to provide footage after a break-in, package theft, or other incident. How Apple’s wider security system would handle those situations remains unclear.
What would be the main advantage of this design? My understanding is that it captures image frames, retains them in RAM, and processes them with a CPU without saving them to a flash (or an SSD). Even if an attacker manages to compromise the camera, there wouldn't be historical data to retrieve. But couldn't an attacker with sufficient access read the frames currently in RAM and possibly capture footage while maintaining the access? Could hardware isolation prevent this even if some of the camera's software were compromised?
It feels like it's becoming harder to strike the right balance between privacy and the actual utility that the device is supposed to provide.
QuiEgo 7 hours ago [-]
Who knows what the thing will actually look like, but aside from the privacy angle, a design like this could be exceptionally light on battery use.
deepfriedchokes 6 hours ago [-]
Why use a camera and the optical spectrum at all when WiFi can do imaging well enough to recognize people? [0]
Xfinity currently offers WiFi motion detection with their gateways. [1]
> record: to cause (sound, visual images, data, etc.) to be registered on something (such as a memory card, hard drive, or optical disc) in reproducible form
Seems accurate if the audio captured isn't stored in a reproducible fashion.
idle_zealot 11 hours ago [-]
It is reproducible. It has to be for their feature to work. They're trying to find some way to communicate to people that the recording is to a ring buffer, and isn't durably saving everything it hears indefinitely. It's an unenviable position to have to find a way to sell your engineering that enables a fairly privacy-preserving implementation of a feature that intuitively feels like it depends on surveillance to a mass audience. Made especially difficult by the environment where most products really are surveilling you even when they don't need to.
Of course, Apple still collects more data than it needs to and abuses users in other ways, so I don't really feel bad for them.
internet2000 10 hours ago [-]
Would you consider a phone call / VoIP a recording? Your voice is being encoded into digital data and put in a small buffer before it can be transmitted to the recipient.
Don't mean to make this sound like a gotcha, but the technical implementation is secondary to how there's no output .wav anyone could play back. I think saying "there's no recording" is a fair and clear to normal people description of what happens.
ceejayoz 1 hours ago [-]
If the phone company turned bits of it into a transcript for me, yes, I would.
10 hours ago [-]
jwrallie 10 hours ago [-]
So the conclusion would be that if the software can be modified, it has a writable storage media attached (not necessarily local) and an image sensor and/or mic, it is, was or will be a recording device at some point in time.
ceejayoz 1 hours ago [-]
You should operate on that assumption, yes, unless you wrote or have reason to deeply trust the code running on it.
zx8080 11 hours ago [-]
Sure. It's the transcript that is stored, isn't it?
iAMkenough 11 hours ago [-]
could what it produces be used by someone else (lawfully or not) to invade my personal privacy?
that’s really the question to be answered here.
9 hours ago [-]
12 hours ago [-]
brcmthrowaway 10 hours ago [-]
Too little, too late. Seeya, Appleberry!
walrus01 11 hours ago [-]
"we're gonna put a camera on a closed-source/closed-firmware device in your living room but it's totally not recording, trust me bro"
Tagbert 10 hours ago [-]
Look at the motivations. What would Apple’s be to record you dancing naked to Taylor Swift.
How is this getting investor money, and how are consumers seeing this as something worth paying for?
It's just not hard to flip the light switch when you leave the room, and you don't need an all-seeing eye uploading everything that happens in your house to a massive corporation.
I can't believe this is a feature that gets the hype that it does. It's almost as cliche as the example of making a dinner reservation.
You could not pay me to use such a stupid device. No clue why people invest in or purchase such a product.
There have been significant price drops in small modules for short range, rudimentary V-band (60 GHz) radar to do this sort of thing, which companies can built into their consumer-priced product.
I think some of the better ones are a little bit too power hungry to be entirely wireless on battery, and have a USB-C port in their rear, you're meant to plug it in persistently to a small USB charger and tuck the cable away somewhere.
I really don't see it as a "huge quality of life improvement" to not have to walk to the light switch. I typically combine it with a trip to the kitchen to grab some water or a snack.
At $0.11 per kWh if say it's 30W and I leave it on 24x7 for a month it's 22.32 kWh, or about $2.5 of electricity a month. Multiply by three for like $7.5 a month if this was a California electric rate. In the longer run I'd like to have a way to turn it on and off automatically not so much to save money, but to have a way to turn off all the house lights in one toggle in home assistant when going to bed, just for the convenience of it.
But ya, it's not that hard, the only place I've found a motion sensor to be useful was in the garage.
https://youtu.be/Ny8-G8EoWOw?si=Z9HUQbfZoPmCBxO3
Unfortunately apple devices collect EXTREME amounts of telemetry, you are opted-in by default, and much of it is impossible to opt-out of.
CoMaps. Though that's probably a bit hardcore for most people.
At the end of the day, Google is worse. But Google has a better set of POIs. If Apple is throwing in the towel on privacy, I'm not sure the degrees matter as much as the difference in quality.
What would be the main advantage of this design? My understanding is that it captures image frames, retains them in RAM, and processes them with a CPU without saving them to a flash (or an SSD). Even if an attacker manages to compromise the camera, there wouldn't be historical data to retrieve. But couldn't an attacker with sufficient access read the frames currently in RAM and possibly capture footage while maintaining the access? Could hardware isolation prevent this even if some of the camera's software were compromised?
It feels like it's becoming harder to strike the right balance between privacy and the actual utility that the device is supposed to provide.
Xfinity currently offers WiFi motion detection with their gateways. [1]
[0] Ordinary WiFi can now identify people with near perfect accuracy https://www.sciencedaily.com/releases/2026/05/260522023127.h...
[1] https://www.xfinity.com/support/articles/wifi-motion
Thanks for letting us know that it's mainly the surveillance device. The advanced one.
"You think your watch records the audio around you? No no no. The audio flows into the Secure Enclave, and flowing is definitely not recording because it’s a different word." (https://leancrew.com/all-this/2026/09/new-apple-watches-have...)
via https://www.merriam-webster.com/dictionary/record
Seems accurate if the audio captured isn't stored in a reproducible fashion.
Of course, Apple still collects more data than it needs to and abuses users in other ways, so I don't really feel bad for them.
Don't mean to make this sound like a gotcha, but the technical implementation is secondary to how there's no output .wav anyone could play back. I think saying "there's no recording" is a fair and clear to normal people description of what happens.
that’s really the question to be answered here.